The Quantum Macc NTM 350-S Vertical Semi-Automatic Cold Saw has a moveable head that can move up to 45 degrees left and 60 degrees right; and the head also has rotation stops at 45° - 0° - 45° - 60°. The NTM 350-S has a vice that is complete with an anti-burr device, motor pump for blade lubrication, shave breaker to keep the blade clean. This unit is equipped with a a 1 meter long bar stop, 1 meter long bar support arm, and service tools, as well as the machine's manual and steel pedestal. Electrical: The NTM 350-S can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.
Cycle start is obtained by pressing the relevant start pedal.
The machine performs the following operations during the cutting cycle:
1.Closing of Vice & Activation of Blade Motor.
2.Cutting Head Begins Down-Stroke.
3.Completes Cut & Head Returns to Initial Position & Blade Motor Stops.
4.The Vice will then Open.
(REPEAT)
